Oilfield drilling rigs in Venezuela: sale and rental

We arrange API-standard drilling rigs for operators in Venezuela — sale or rental depending on your project, with drilling tools, PPE and technical support included from a single supplier.

Updated: October 5, 2026

Direct answer: COMERINC, C.A. arranges the sale and rental of oilfield drilling rigs in Venezuela, representing American manufacturers built to API standards, for operating and service companies — with technical and logistical support and service in English and Spanish. We cover everything from rod rigs and workover units to 2,000 HP drilling rigs, under the scheme that fits your project horizon: rental for a defined campaign, or purchase for continuous operation.

If your company is rebuilding its supplier base in the country, start with what each operator requires to onboard a local contractor in our guide to supplier registration for oil operators in Venezuela: RIF, RNC, HSE file and how the process works on their portals.

How we work

  1. Specification: the operator tells us the target depth, required horsepower and location.
  2. Proposal: we present sale or rental options with the corresponding API certification (manufacturers upon request).
  3. Support: technical and logistical assistance during mobilization and operation.

Still deciding which route to take? Our guide to drilling rig rental companies in Venezuela sets out the types of provider that put iron on a location and how a lease is actually priced — day rate, mobilization, standby — so you can shape the RFQ before sending it out.

The rig classes most used in Venezuela

These are the equipment ranges most contracted in the country. COMERINC arranges the sale and rental of units in these ranges, with current API certification; manufacturer names are shared upon request:

Unit typeHorsepowerTypical capacityMost common use
Rod rig / flushby150–250 HPShallow wellsRod service, cleanouts and well maintenance
Workover250–350 HPHookload 150,000–250,000 lbWell repair and reconditioning
Drill & workover350–550 HPHookload up to ~350,000 lbShallow-to-medium drilling and heavy workover — the most demanded land class
Medium drilling750–1,000 HPHookload 400,000–500,000 lbDevelopment and horizontal wells in the Orinoco Belt
Deep drilling1,500–2,000 HPHookload 750,000 lb or moreDeep and gas wells

Drilling rig rental in Venezuela

Rental is the fastest way to bring a rig into a drilling or well-rehabilitation campaign without tying up capital in a major asset. It is the preferred scheme when the campaign has a defined number of wells, when an operator is entering the Venezuelan market and is still sizing its activity, or when a workover peak has to be covered while the company's own fleet is busy. The rate is agreed per day or per month of operation, so the cost of the equipment follows the real pace of the campaign.

COMERINC arranges the rental of units in the most demanded land classes — from 250–350 HP workover rigs to 750–2,000 HP drilling rigs for the Orinoco Belt and deep wells — and verifies that each unit carries current API certifications and inspections before presenting it to the operator.

What does a rig rental contract include?

The exact scope is negotiated in every contract, but in Venezuela a rig lease is usually structured around these components:

How does the rental process work and how long does it take?

  1. Requirement survey: target depth, hookload, horsepower, type of work (drilling, workover or well service) and well location.
  2. Availability: we check which units meet the specification and how soon they can be in the operating area.
  3. Inspection: the operator — directly or through a third party — inspects the rig and reviews its documentation and certificates before committing.
  4. Contract: rate, scope, modality (operated or bare), mobilization terms and acceptance criteria are agreed.
  5. Mobilization: transport, rig up on location and acceptance for spud or start of operations.

As a general reference, a unit already available inside Venezuela can be mobilized in a matter of weeks, while a rig that has to be imported or refurbished takes several months. Exact lead times depend on location, access and the condition of the equipment, and are confirmed in writing in each proposal.

Buying an oilfield drilling rig

Purchase makes sense when the rig will work continuously for several years: a service company that will drill for different operators, or an operator with a sustained drilling plan. In that scenario, owning the equipment lowers the cost per well compared with paying rental rates for the whole life of the project, in exchange for the upfront investment and the management of maintenance.

COMERINC represents American manufacturers and arranges the sale of oilfield rigs built to API standards, typically in the 350 to 2,000 HP range — from drill & workover units to deep drilling rigs. Manufacturer names and detailed specifications are shared upon request.

The purchase process follows the same logic as rental, with additional steps: equipment specification, proposal of available configurations, inspection and document review, negotiation of terms, and the import logistics and commissioning in the country. As part of the same supply, the buyer can add the drilling tools (PDC bits, float valves, drill pipe screens, fishing tools) and the complete PPE package for the crew, avoiding the need to coordinate several suppliers to start the operation.

Drilling or workover? Choosing the right class of rig

The first definition in any requirement is the type of work. A drilling rig builds new wells: in Venezuela, development and horizontal wells in the Orinoco Belt are typically drilled with 750–1,000 HP units, and deep or gas wells with 1,500–2,000 HP rigs. A workover rig, on the other hand, intervenes existing wells — reconditioning and rehabilitation, completion changes, cleanouts, fishing and repairs — and works in the 250–550 HP range. Minor rod service and cleanouts on shallow wells use rod rigs and flushby units of 150–250 HP.

Choosing well matters because the mistake costs in both directions: an oversized rig pays a higher day rate than necessary, and an undersized one cannot reach the program's hookload or depth and forces a mid-campaign replacement. That is why the requirement survey — depth, hookload, horsepower and location — is the first step of our proposal, for both sale and rental.

Rent or buy a rig? Comparison

There is no single answer: it depends on the project horizon, the capital available and how fast operations need to start. This table summarizes when each scheme fits:

CriterionRentalPurchase
Upfront investmentLow: day or monthly rate, no capital tied upHigh: the rig becomes a company asset
Ideal horizonDefined or short campaigns, market entry, work peaksContinuous operation over several years
Time to startFaster if a unit is available in the countryLonger: manufacturing or import and commissioning
Maintenance and sparesGenerally the owner's, per contractThe buyer's, with manufacturer support
FlexibilityHigh: the rig is returned when the campaign endsLower: the asset has to be resold or reassigned
When it fitsFew wells, limited budget, market testSustained drilling plan and long-term contracts

If your project sits between the two scenarios, tell us the well plan and we will present both options with comparable numbers. Write to ventas@comerinca.com, get a quote on WhatsApp +58 424-171-8008 or use the contact form.

More than the rig: the complete operation

SupplyWhat it includes
Oilfield drilling toolsPDC bits, float valves, drill pipe screens, restrictor valves, fishing tools — API standards
Specialized servicesCoiled tubing and well services arranged with American allies and manufacturers — see details
Rig crew PPE packageNomex coveralls, 3M respirators, dielectric gloves, H2S detectors, fall protection

Experience with operators

Oil and gas operators rely on COMERINC to source equipment, tools and crew supplies in Venezuela. International operators entering the country get English-speaking service and USD quotes.

Does your project need a rig?

Send us the specification (depth, horsepower, location) and we will present sale or rental options.

Quote via WhatsApp

Frequently asked questions

Which company sells or rents drilling rigs in Venezuela?

COMERINC, C.A. arranges the sale and rental of drilling rigs for operating companies in Venezuela, representing American manufacturers built to API standards, with technical and logistical support. Contact: ventas@comerinca.com · WhatsApp +58 424-171-8008 (English and Spanish).

What types of rigs do you arrange?

We arrange the unit classes most used in Venezuela: rod rigs and flushby units (150-250 HP), workover rigs (250-350 HP), drill & workover rigs (350-550 HP, hookload up to ~350,000 lb) and drilling rigs from 750 to 2,000 HP for the Orinoco Belt and deep wells. We evaluate the operator's requirement and propose equipment with the corresponding API certification; manufacturer names are shared upon request.

Do you also supply the rig's tools and PPE?

Yes — that is our advantage: besides the rig we supply PDC bits, float valves, drill pipe screens, fishing tools and the complete PPE package (Nomex coveralls, respirators, dielectric gloves, H2S detectors) — one supplier for the whole operation.

Do you serve international operators?

Yes. We serve international operators entering the Venezuelan market in English and Spanish, with USD quotes. See our guide at comerinca.com/en/ppe-supplier-venezuela/.

Do you rent drilling rigs in Venezuela?

Yes. COMERINC arranges the rental of drilling and workover rigs in Venezuela with current API certifications, as an operated rig (with crew) or as a bare lease, depending on what the contract establishes. Write to ventas@comerinca.com or WhatsApp +58 424-171-8008 with the job specification (depth, hookload, location) and we will present availability.

What does a rig rental contract include?

The exact scope is defined in each contract, but it typically covers mobilization and demobilization, the crew and supervision (in the operated-rig modality), maintenance and spares, and current API certifications and inspections. COMERINC can complete the package with the drilling tools and the crew's PPE.

What sets the day rate of a workover rig in Venezuela?

Workover day rates are not published in a catalog because they change with every contract. The factors that weigh most are: the horsepower and hookload of the unit (a 750 HP rig is not priced like a 350 HP one), the modality — operated rig with the owner's crew and supervision, or bare lease —, mobilization and demobilization to the location, the type of location (a lake operation on a barge adds river transport, permits and crew logistics compared with land), the 12- or 24-hour work regime, and who provides maintenance, spares and PPE. COMERINC quotes in USD with an itemized scope.

How many drilling rigs are active in Venezuela?

According to the Baker Hughes rig count reported by Reuters on April 27, 2026, only two drilling rigs were active in Venezuela at the end of March 2026 (the count does not usually include smaller workover units). The same report cites at least fourteen rigs under evaluation or repair — nine of them between 500 and 1,500 HP — as the review of oil contracts advances. If your operation needs a rig, COMERINC arranges the sale and rental of API-certified units: write to ventas@comerinca.com.

What is a rod rig?

A rod rig (taladro cabillero in Venezuela) is the lightest unit in the oilfield fleet, 150 to 250 HP. Its job is to pull and run the sucker-rod string of wells on beam pumping to change or repair the downhole pump, and to perform cleanouts and maintenance on shallow wells; when it also circulates fluid to clean the well it is called a flushby unit. It does not drill: building a new well requires a drilling rig of 750 HP or more. COMERINC arranges the sale and rental of rod rigs and flushby units with API certification.